Compass @ Manufacturer ATONAL Overspends fondants LIMITED LIFETIME WARRANTY Compass Manufacturing International warrants to the original consumer purchaser that the faucet be free from defects In material and workmanship for 2s long as the original consumer purchaser owns the home in which the faucet was first installed.
+ Helpful Tools Tools: Gather the necessary tools as shown below to complete the installation of this faucet. Some may not be needed depending on the model of faucet you are installing. Plumber's Putty Flashlight Basin Wrench and/or Silicone = Adjustable Ranch Safety Glasses Screwdriver Pullers Channel Locks Maintenance Your new faucet Is designed for years of trouble-free performance. Keep It looking new by cleaning It periodically with a soft, damp cloth.
Walking The supply valves and supply lines are not included. Connect to water supply lines with either: (A) 3/8” 0.D. Copper tubing (ball nose risers with the coupling nuts or; (B) 3/8” Copper tubing (no ball) with supplied tube head interior connector or; (C) IPS faucet connectors (12") Important: Tighten connection with two wrenches to prevent damage to tube body. Be careful not to bend the stem as this will void the product warranty.
Deck Plate Installation Position the faucet, O-ring deck plate and gasket {#19) on the counter top in the order shown. 2. Attach the faucet to the counter top using the rubber washer clamp (#16) and lockout Tighten the lockout (#17) with the socket wrench DO NOT OVER TIGHTEN. Add silicone under gasket (#19) to prevent leaks. (Optional} Single Hole Installation 13— —= 1. Position the faucet and O-ring (#13) on the counter top in the order shown. 2.
