Installation Guide

ManualsBrandsCMI ManualsBathroomAegean Polished Chrome 2-handle Widespread WaterSense Bathroom Sink Faucet with Drain

Aegean Wide Spread Bathroom Faucet With

Brass Pop-Up

Model No. : Polished Chrome

192-6438 Brushed Nickel

192-6439 Oil-Rubbed Bronze

192-6437

3 Hole Installation , to 6"-10" Center-Set

Revised 5/2/17

In the event that Freendo faucets are used in a Commercial Application, this warranty is limited for

a period of 5 years, unless otherwise specifically stated in the catalog and/or price book.

repair. Compass Manufacturing International will, at its discretion, provide new or equivalent replacement

parts for any product that proves to be defective under normal usage and service.

Summary of content (4 pages)

PAGE 1
Model No. : 192-6437 192-6438 192-6439 Polished Chrome Brushed Nickel Oil-Rubbed Bronze In the event that Freendo faucets are used in a Commercial Application, this warranty is limited for a period of 5 years, unless otherwise specifically stated in the catalog and/or price book. repair. Compass Manufacturing International will, at its discretion, provide new or equivalent replacement parts for any product that proves to be defective under normal usage and service.
PAGE 2
2 Connect Hose 44 Spring Clip 21 43 Rod Guide Nut 20 O-ring Base 42 Rod Ball Plastic Gasket 19 Flow Restricter 41 Horizontal Rod Tailpiece 39 Drain Body 16 Screw Aerator Body 40 38 Locknut 15 Spout 37 Washer 14 Clip 36 13 Screw 35 Bottom Rubber Washer Top Rubber Washer 12 Locknut Clamp 34 Flange 11 33 Drain Stopper 10 O-ring 32 Extend Rod Screw 9 O-ring 31 Extend Rod 8 30 Lift Rod 7 Brass Valve Body O-ring 29 6 Cartridge Seat 28 Allen Key Locknut 5
PAGE 3
Faucet Installation 1. 2. 1 16 15 1 26 16 21 17 1 27 18 28 2 3 4 19 5 6 20 21 27 11 12 29 28 13 3. 7 22 8 9 10 23 24 11 25 12 13 14 30 14 31 33 24 32 34 35 36 37 38 42 39 40 41 43 44 1. Position spout 16 and O-ring 21 on countertop, from underneath of the countertop, assemble clamp 27 and locknut 28 , tighten the locknut with basin wrench. 2. Position the handle 1 as shown,and assemble the clamp 11 , locknut 12 and screw 13 .
PAGE 4
flange 34 top rubber washer 35 faucet body drain body 39 flange 34 sink base drain stopper 33 o-ring lift rod 30 sink horizontal rod 41 washer 37 locknut 38 tailpiece 40 bottom rubber washer 36 align hole in drain stopper with guide rod opening (pointed toward back wall) drain body 39 A. Remove pop-up drain stopper 33 . A. Replace pop-up drain stopper 33 and flange 34 with top rubber to drain body 39 with o-ring washer 35 for pop-up assembly. in place, and align stopper hole B.