Installation Guide

1
Warning:
The supply valve and supply lines are not included.
A. Faucet tailpiece B. Faucet tailpiece C. Faucet tailpiece
2. Remove the plastic locknut 19 and washer 18 from
faucet. Don't remove the putty plate 17 from faucet.
17
18
19
3. Position the faucet on the countertop with putty
plate 17 . Replace the washer 18 and plastic locknuts
19 on the faucet tailpiece 36 and tighten the plastic
locknuts 19 by hand.
36
17
18
19
Let both hot and cold water run for one minute.
This will help clean any debris that might clog
the system.