Compass Q Manufacturer ATONAL Overspends fondants LIMITED LIFETIME WARRANTY Compass Manufacturing International warrants to the original consumer purchaser that the faucet be free from defects In material and workmanship for 2s long as the original consumer purchaser owns the home in which the faucet was first installed.
+ Helpful Tools Tools: Gather the necessary tools as shown below to complete the installation of this faucet. Some may not be needed depending on the model of faucet you are installing. Plumber's Putty Flashlight Basin Wrench and/or Silicone = Adjustable Ranch Safety Glasses Screwdriver Pliers Channel Locks Maintenance Your new faucet Is designed for years of trouble-free performance. Keep It looking new by cleaning It periodically with a soft, damp cloth.
Ag Warning: The supply valves and { supply lines are not included. Connect to water supply lines with either: (A) 3/8” 0.D. Copper tubing (ball nose risers with the coupling nuts or; (B) 3/8” Copper tubing (no ball} with supplied tube head interior connector or; (C) IPS faucet connectors So [ISN 0, ~# Important: Tighten connection with two wrenches to prevent damage to tube body. Be careful not to bend the stem as this will void the product warranty.
1. Shut off the water supplies before installation. Remove the current faucet. Clean and dry the surface the new faucet will be installed on. Note: This faucet fits counter tops. 2. Remove the lock nut (#14) and gasket assembly Note: Do not remove the customer service tag with the model number and phone number. This information will be needed when calling the customer service department. 3. Apply Teflon tape to the threads of the waterway (#16) (hot and cold water supply tubes) in a clockwise direction. 4.
