Installation Guide

ManualsBrandsCMI ManualsBathroomCardania Polished Chrome 2-Handle Widespread WaterSense Bathroom Sink Faucet with Drain

Cardania Wide Spread Bathroom Faucet

With Pop-up

Model No. : Polished Chrome

192-6405 Brushed Nickel

192-6406 Oil-Rubbed Bronze

192-6404

3 Hole Installation, 6 -10 Center-Set

Revised 4/24/17

In the event that Freendo faucets are used in a Commercial Application, this warranty is limited for

a period of 5 years, unless otherwise specifically stated in the catalog and/or price book.

repair. Compass Manufacturing International will, at its discretion, provide new or equivalent replacement

parts for any product that proves to be defective under normal usage and service.

Summary of content (4 pages)

PAGE 1
Model No. : 192-6404 192-6405 192-6406 Polished Chrome Brushed Nickel Oil-Rubbed Bronze In the event that Freendo faucets are used in a Commercial Application, this warranty is limited for a period of 5 years, unless otherwise specifically stated in the catalog and/or price book. repair. Compass Manufacturing International will, at its discretion, provide new or equivalent replacement parts for any product that proves to be defective under normal usage and service.
PAGE 2
Inlet 46 Lift Rod O-ring 45 Extend Rod Spring Clip 20 O-ring Sleeve 44 43 Rod Guide Nut 19 Aerator 42 Rod Ball Plastic Gasket 18 Spout 41 17 Clip 40 Horizontal Rod Tailpiece 16 Screw 39 Drain Body 15 38 Locknut 14 Locknut Clamp 37 Washer 13 O-ring 36 12 O-ring 35 Bottom Rubber Washer Top Rubber Washer 11 Brass Valve Body O-ring 34 Flange 33 Drain Stopper 9 Cartridge Seat 32 Extend Rod Screw 8 Cartridge(Hot Water) 31 Allen Key 7 Handle Adapter 30 Aerato
PAGE 3
Faucet Installation 1. 20 2. 18 2 18 1 21 29 3 4 5 6 19 21 14 25 26 22 7 8 15 16 23 3. 24 9 10 11 12 13 1 25 30 26 31 28 27 14 33 15 16 17 17 34 35 36 37 38 27 46 45 42 39 40 41 43 44 32 1. Position spout 18 and O-ring 21 on countertop, from underneath of the countertop, assemble clamp 25 and locknut 26 , tighten the locknut with basin wrench. 2. Position the handle 1 as shown,and assemble the clamp 14 , locknut 15 and screw 16 .
PAGE 4
flange 34 top rubber washer 35 lift rod 46 drain body 39 flange 34 sink base drain stopper 33 o-ring faucet body sink horizontal rod 41 washer 37 locknut 38 tailpiece 40 bottom rubber washer 36 align hole in drain stopper with guide rod opening (pointed toward back wall) drain body 39 A. Remove pop-up drain stopper 33 . A. Replace pop-up drain stopper 33 and flange 34 with top rubber to drain body 39 with o-ring washer 35 for pop-up assembly. in place, and align stopper hole B.