Compass @ Manufacturer ATONAL Overspends fondants LIMITED LIFETIME WARRANTY Compass Manufacturing International warrants to the original consumer purchaser that the faucet be free from defects In material and workmanship for 2s long as the original consumer purchaser owns the home in which the faucet was first installed.
+ Helpful Tools Tools: Gather the necessary tools as shown below to complete the installation of this faucet. Some may not be needed depending on the model of faucet you are installing. Flashlight Basin Wrench Safety Glasses Plumber's Putty and/or Silicone = Screwdriver Pullers Channel Locks Adjustable Ranch Maintenance Your new faucet Is designed for years of trouble-free performance. Keep It looking new by cleaning It periodically with a soft, damp cloth.
Part Name Hands ot Screw Index Trim Cap Cartridge Lock Nut = Cartridge Walking O-ring The supply valves and S O-ring supply lines are not :::allure included. Waterway i Screw Copper Tubs (Hot) Copper Tubs (Cold) O-ring Adapter Connect to water supply lines with either: Coining Bt (A) 3/8” 0.D. Copper tubing (ball nose risers with the coupling G; .
Deck Plate Installation 1. Position the faucet, deck plate gasket (#19) and seal (#20) on the counter top in order as shown. 2. Attach the faucet to the counter top with the clamp and lock nut using the socket wrench DO NOT OVER TIGHTEN. Add silicons under the gasket (#19) to prevent Teaks. (Optional) Single Hole Installation s 1. Position the faucet, gasket and sponge gasket {#22) in the order shown. 2.
