Model No.
5 3 1 4 2 5 6 7 8 Extend Rod Fittings 30 Rod Guide Nut 29 Rod Ball Plastic Gasket 28 27 Horizontal Rod Tailpiece 26 Drain Body 9 10 25 Locknut 24 Washer 12 23 22 Bottom Rubber Washer Top Rubber Washer 21 Flange 20 Drain Stopper 19 Allen Key 18 13 19 14 15 Plumber's Putty 31 32 18 Aerator Wrench 17 16 16 Locknut Clamp 17 15 Bolt 14 Putty Plate 13 Deck Plate O-ring 20 12 21 22 23 24 25 10 Lift Rod Copper tube 9 Copper tube 8 7 Aerator Body 6 Cartridge
1 4 Install With Deck Plate A. B. C. Warning: The supply valves and supply lines are not included, please purchase them at a plumbing supply store. 12 13 14 16 17 1.Position the faucet, deck plate 13 and putty plate 14 in order on the countertop as shown. Don't forget the o-ring 12 . 2.Fix the faucet with clamp 16 and locknut 17 , and tighten the locknut with basin wrench. But DON'T OVER TIGHTEN. Add silicone under faucet to prevent leaks.(Optional) Install Without Deck Plate 12 16 17 t 1.
3 2 flange 21 top rubber washer 22 lift rod 11 drain body 26 flange 21 sink base drain stopper 20 o-ring faucet body sink horizontal rod 28 washer 24 locknut 25 tailpiece 27 bottom rubber washer 23 align hole in drain stopper with guide rod opening (pointed toward back wall) drain body 26 drain body 26 drain stopper hole screw rod ball plastic gasket 29 extend rod 32 rod guide nut 30 horizontal rod 28 fittings 31 A. Remove pop-up drain stopper 20 . A.
