Compass @ Manufacturer ATONAL Overspends fondants LIMITED LIFETIME WARRANTY Compass Manufacturing International warrants to the original consumer purchaser that the faucet be free from defects In material and workmanship for 2s long as the original consumer purchaser owns the home in which the faucet was first installed.
+ Helpful Tools Tools: Gather the necessary tools as shown below to complete the installation of this faucet. Some may not be needed depending on the model of faucet you are installing. Plumber's Putty Basin Wrench Safety Glasses and/or Silicone = Adjustable Ranch Flashlight Screwdriver Pullers Channel Locks Maintenance Your new faucet Is designed for years of trouble-free performance. Keep It looking new by cleaning It periodically with a soft, damp cloth.
Part Name Sower Index Handle Trim Gap Cartridge Lock Nut Cartridge Body The supply valves and ? supply lines are not Copper tubs {Cold) C. @ Walking included. Backpedal Gasket Mounting Bolt Clamp Lock Nut ¢ 8 Connect to water supply lines with either: = Allen Wrench Drain Stoppard (A) 3/8” 0.D.
Deck Plate Installation 1. Position the faucet, O-ring deck plate and gasket (#14) on the counter top in the order shown. 2. Attach the faucet to the counter top using the clamp (#16) and lock nut (#17) with a basin wrench. DO NOT OVER TIGHTEN. Add silicone under the gasket (#14) to prevent leaks. (Optional) Single Hole Installation 1. Position the faucet and O-ring (#12) on the counter top in the order shown. 2.
