Use and Care Manual

10 / 20
Note 2: Please go to the computer DAW software or MIDI device setting page and
select WIDI Uhost as the USB MIDI input and output device.
⚫ Connect two WIDI Uhosts via Bluetooth
1. Turn the power on of both MIDI devices equipped with WIDI Uhost.
2. The two WIDI Uhosts units will pair via Bluetooth automatically, and
the blue LED will change from slow flashing to constant light (when
there is MIDI data sending, the LED light will flash dynamically).
⚫ Connect WIDI Uhost with Bluetooth MIDI device
Video instruction: https://youtu.be/7x5iMbzfd0o
1. Turn on both the MIDI devices plugged with WIDI Uhost as well as the
Bluetooth MIDI devices.
2. WIDI Uhost will automatically pair with the Bluetooth MIDI device, and
the blue LED will change from slow flashing to constant light (when
there is MIDI data sending, the LED light will flash dynamically)
Note: If WIDI Uhost cannot automatically pair with another Bluetooth MIDI device, it
may be caused by a compatibility issue. In that case, please contact CME for
technical support.
⚫ Connect WIDI Uhost with macOS X via Bluetooth
Video instruction: https://youtu.be/bKcTfR-d46A
1. Turn on the power of the MIDI device with the WIDI Uhost plugged in,
and confirm that the blue LED flashes slowly.
2. Click the [Apple icon] on the upper left corner of the screen, click the
[System Preferences] menu, click the [Bluetooth icon], and click
[Turn Bluetooth On], then exit the Bluetooth settings window.