User`s manual

Wireless MIDI Interface User’s Manual
15
4.2 Automatic Notes Off
In either one of the following cases, the system will automatically
send the “All Notes Off” and “All Sound off” MIDI messages to stop
the sound from the tone generator.
z Bad signal with data loss.
z During the communicator the sender is switched off.
z Radio channel changed.
4.3 On-line Detection
After powered on the WIDI system will automatically detect the
on-line status. The green indicator will show the communication
status.
5 Notice
z Before launching Cakewalk or other music software, make sure
the product is properly connected the computer, otherwise the
music software cannot find the MIDI device.
z Close the music or audio software before removing the product.
z Stopping the product in the OS before unplug it from the
computer, which is better then unplugging it directly.
z Remove all the obstacles and un-wanted RF devices near the
product.
z When the signal indicator (green) flashes, it means there is
interference, and if the indicator flashes fast, it means too much
interference stops the communication. To get a good
communication, the green indicators on both sides should be
on.
z If many pairs of WIDI products are used at the same place,
please limit the channel settings to 1-32 for best communication
quality.