User`s manual

Wireless MIDI Interface User’s Manual
14
System command data: F0 00 20 63 00 07 02 02 10 60 F7
This command will disable the wireless transmission.
WIDI Control operation: Click “RF OFF”.
Note:
For proper communication, each pair of the WIDI devices
should use the same channel, and different pairs use different
channels.
The WIDI system supports up to 32 pairs of WIDI devices to be
used at the same place. When several pairs of WIDI devices are
used at the same place, please use the channel number 1-32.
An available WIDI device means this WIDI device dose not
establish communication with another one.
WIDI devices include WIDI-X8, WIDI-XU, WIDI-EK, etc.
3.5 Removal Of The Product
If you finish using the product, please remove it from your computer
in the proper way as below:
z Close the music software that uses the product.
z Stop the “USB Audio Device” from windows device manager.
z Unplug the product from the computer。
4 Automation
4.1 Automatic Communication Establishing
z Automatic establishing communication when powered on.
When the product is powered on, it will automatically search and
find another available WIDI device and establish communication.
When the communication is established, the signal indicator
(green) will be on.
z Automatic establishing communication when channel changed
When the channel is changed (either manually or automatically),
the product will automatically establish communication. When the
communication is established, the signal indicator (green) will be
on.