Use and Care Manual

6 / 16
1. Plug the USB-A connector of WIDI Bud Pro into USB-A socket of the
computer (compatible operating systems include: Windows, macOS,
iOS, Android, Linux, ChromeOS) or the USB-A Host socket of USB
MIDI device. The LED light is lit, and the interface will be
automatically detected as a class compliant USB MIDI device.
2. Please go to the computer DAW software or MIDI device setting page
and select WIDI Bud Pro as the USB MIDI input and output device,
then you can send and receive Bluetooth MIDI messages through it.
Note 1: WIDI Bud Pro does not have a power switch, it can start to work just by
connecting the power.
Note 2: When connecting to the USB Memory Port of Roland V-accordion and
other devices, if you want to play the internal sound of the instrument without
connecting to a computer, please refer to the WIDI App manual to turn on the WIDI
USB Soft Thru switch.
⚫ Connect two WIDI Bud Pros via Bluetooth
1. Turn the power on of both MIDI devices equipped with WIDI Bud Pro.
2. The two WIDI Bud Pros units will pair via Bluetooth automatically, and
the blue LED will change from slow flashing to constant light (when
there is MIDI data sending, the LED light will flash dynamically).
⚫ Connect WIDI Bud Pro with Bluetooth MIDI device