User manual

Plugiator ASX User Manual

Getting StartedGetting Started

Getting Started

Installing the Plugiator ASX into your CME kInstalling the Plugiator ASX into your CME k

Installing the Plugiator ASX into your CME k

eyboard.eyboard.

eyboard.

The Plugiator ASX board has been designed to be used with either the CME UF or VX

Series keyboards.

1. At the rear of your keyboard you will find an expansion slot that is used for expansion

boards such as the Plugiator ASX.

2. If you have previously not used an expansion board in your keyboard this slot

would be covered by a blank panel.

3. Remove the blank panel covering the expansion slot.

4. You will find attached to the blank panel, connectors for the ASX board.

5. The ASX board is supplied with a slot panel to fit the size of the expansion slot on

the UF Series keyboards.

If you are using a VX Series keyboard, please unscrew the panel from the Plugiator

ASX board and use the spare VX slot panel supplied along with your Plugiator ASX

board.

A. Instructions for CME UF Series keyboards.

B. Instructions for CME VX Series keyboards.