User manual

Plugiator ASX User Manual

Using the Plug-in Manager SoftwareUsing the Plug-in Manager Software

Using the Plug-in Manager Software

GeneralGeneral

General

To control your Plugiator ASX with the Plug-in Manager software, you will need to

connect the Plugiator ASX to a computer via USB or MIDI. (Please refer to the previous

chapter "USB connections and Driver installation")

Double clicking on the shortcut called "Plug-in Manager" will load the application.

The software will prompt you to select the correct drivers to which the Plugiator ASX

is connected. If you have connected over USB please select the USB Audio Device for

the input and output (figure shown below)