User manual

19
Plugiator ASX User Manual
Confirming that the Device has been found and the Drivers have beenConfirming that the Device has been found and the Drivers have been
Confirming that the Device has been found and the Drivers have beenConfirming that the Device has been found and the Drivers have been
Confirming that the Device has been found and the Drivers have been
correctly installed:correctly installed:
correctly installed:correctly installed:
correctly installed:
1. Go to My Computer -> Device Manager.
2. Under your Machine Name -> Sound Video & Game controllers you will find
an entry for your Plugiator ASX hardware called "USB Audio Device"
3. If you can see the entry for the `USB Audio Device' within Device Manager the
driver installation is correct.
If this step was not successful, unplug the USB cable from the computer and try to use
an alternative USB port available.
Note: Note:
Note: Note:
Note: It is recomended that you always use the same USB port to connect the Plugiator
ASX to your Computer which you used while installing the drivers. Otherwise, in some
computer configurations, your Plugiator ASX board may not be recognized.