User manual

Plugiator ASX User Manual

USB Connections & Driver InstallationUSB Connections & Driver Installation

USB Connections & Driver Installation

The USB interface on the Plugiator ASX is used for two applications:

1. To connect the Plugiator ASX to the Plug-in Manager software installed on

your computer / laptop to manage presets and settings.

2. To record MIDI information from your Plugiator ASX directly into your favourite

computer music sequencing application.

To install the Plugiator ASX Drivers and Plug-in Manager software on a PC you will

require a Windows XP operating system with Service Pack 2 or Windows Vista. For

support of the Mac OSX please refer to www.use-audio.com.

After connecting the Plugiator ASX board to your computer’s USB port, Windows will

automatically detect and install the “USB Audio Driver”

You will see a dialog box (figure shown below) displaying that a new USB device has

been found and that Windows is installing drivers for this device automatically.