User manual

14
Plugiator ASX User Manual
External ConnectionsExternal Connections
External ConnectionsExternal Connections
External Connections
After having installed the Plugiator ASX board into your keyboard you will have
access to its physical connections on the rear of your keyboard.
1. USB1. USB
1. USB1. USB
1. USB
Connect your Plugiator ASX to your computer's USB port in order to use it with a MIDI
sequencer or the Plug-in Manager software.
2. Mic2. Mic
2. Mic2. Mic
2. Mic
The expansion board allows you to connect a professional dynamic microphone to
your keyboard over a ¼" phono jack. Please note that some commercial headset
microphones use TRS connectors with Tip and Ring internally shorted. Please refer to
Common Connectors for both UF & VX“ in this User Manual.
3. Audio Out3. Audio Out
3. Audio Out3. Audio Out
3. Audio Out
The Audio outputs of the Plugiator ASX are two high quality analog unbalanced line
level outputs available on ¼" phono jacks as left and right signals.
In order to hear audio from your expansion board, connect the Audio Out L & R to
the Left / Right inputs of a mixing console, a pair of powered speakers, a computer
sound card or a HiFi system.
4. Headphone4. Headphone
4. Headphone4. Headphone
4. Headphone
A headphone output is available on a ¼" phono stereo jack for monitoring audio
over a pair of stereo headphones.
1
23
4