User manual

Plugiator ASX User Manual

B.B.

Instructions for VX Series kInstructions for VX Series k

Instructions for VX Series k

eyboardseyboards

eyboards

1. You will find one JST type connector attached to the back panel of the expansion

slot.

2. This is an 8 pin connector.

3. The 8 pin connector provides both power & MIDI from the keyboard to the Plugiator

ASX board.

Making connections for the VX Series kMaking connections for the VX Series k

Making connections for the VX Series k

eyboards:eyboards:

eyboards:

1. You will find a total of 5 JST connectors. One of them is a 8 pin JST XH connector.

2. Connect the 8 pin JST XH connector from the keyboard to the 8 pin sockets located

on the right side of the board as shown in the diagram.