User manual

Installing the Neosynth expansion board into your CME VX or UF keyboard

First of all, be sure to unplug the power plug and USB cable from your keyboard to avoid electrical short-

cuts during installation.

Also be sure to ground yourself to avoid static electricity which could damage your NeoSynth expansion

board. Do not touch electronic parts of the expansion board either since this can damage the expansion

card as well.

Step 1:

Unscrew the metal plate on your VX or UF keyboard on the back. The plate is holded by 4 screws on the

VX keyboard and 5 screws on the UF keyboard ( next three pictures shows the VX version).

Step 2:

Locate the power/communication connector that should be connected to the Neosynth expansion board

(1 connector on the VX keyboard, 2 smaller connectors on the UF keyboard).

Connectors feature a mounting direction, the right direction must be respected, no force must be applied

while inserting the connector(s).