User manual

SYSEX F0H 41H 00H 42H 12H 40H 01H Chorus send level to reverb, default = 0 GS

3FH vv xx F7H

SYSEX F0H 41H 00H 42H 12H 40H 1pH MIDI channel to part assign, p is part (0 to 15), nn is MIDI GS

02H nn xx F7Hchannel (0 to 15, 16 = OFF).

This SYSEX allows to assign several parts to a single MIDI

channel or to mute a part.

Default assignment:

part

MIDI channel

0 9 (DRUMS)

1-9 0-8

10-15 10-15

SYSEX F0H 41H 00H 42H 12H 40H 1pH Part to rhythm allocation, p is part (0 to 15), vv is 00 GS

15H vv xx F7H (sound part) or 01 (rhythm part).

This SYSEX allows a part to play sound or drumset. There

is no limitation of the number of parts playing drumset.

Default assignment: part 0 plays drums (default MIDI

channel 9) all other parts play sound.

SYSEX F0H 41H 00H 42H 12H 40H 1nH Scale tuning, n is MIDI channel (0 to 15), v1 to v12 are 12 GS

40H v1 v2 ... v12 xx F7H semi-tones tuning values (C, C#, D, ... A#, B), in the

range -64 (00H); 0 (40H); +63(7FH) cents.

This SYSEX allows non chromatic tuning of the musical

scale on a given MIDI channel. Default v1, v2, ... ,

v12 = 40H, 40H,...,40H (chromatic tuning).

Scale tuning has no effect if the part is assigned to a

rhythm channel or if the sound played is not of chromatic

type.

SYSEX F0H 41H 00H 42H 12H 40H 1nH Velocity slope from 00H to 7FH (default = 40H) GS

1AH vv xx F7H

SYSEX F0H 41H 00H 42H 12H 40H 1nH Velocity offset from 00H to 7FH (default = 40H) GS

1BH vv xx F7H

SYSEX F0H 41H 00H 42H 12H 40H 1nH CC1 Controller number (00-5FH) (default = 10H) GS

1FH vv xx F7H

SYSEX F0H 41H 00H 42H 12H 40H 1nH CC2 Controller number (00-5FH) (default = 11H) GS

20H vv xx F7H

SYSEX F0H 41H 00H 42H 12H 40H 2nH Mod pitch control (-24,+24 semitone) (default = 40H) GS

00H vv xx F7H

SYSEX F0H 41H 00H 42H 12H 40H 2nH Mod tvf cutoff control (default = 40H) GS

01H vv xx F7H

SYSEX F0H 41H 00H 42H 12H 40H 2nH Mod Amplitude control (-100%-+100%) (default = 40H) GS

02H vv xx F7H