User manual

CTRL 73 BnH 49H cc Env attack time modify (same as nrpn 0163h) GM/GS
CTRL 74 BnH 4AH cc TVF cutoff freq modify (same as nrpn 0120h) GM/GS
CTRL 75 BnH 4BH cc Env decay time modify (same as nrpn 0164h) GM/GS
CTRL 76 BnH 4CH cc Vibrato rate modify (same as nrpn 0108h) GM/GS
CTRL 77 BnH 4DH cc Vibrato depth modify (same as nrpn 0109h) GM/GS
CTRL 78 BnH 4EH cc Vibrato delay modify (same as nrpn 010Ah) GM/GS
CTRL 84 BnH 54H vv Portamento control GS
CTRL 91 BnH 5BH vv Reverb send level vv = 00H to 7FH GS
CTRL 93 BnH 5DH vv Chorus send level vv = 00H to 7FH GS
CTRL 120 BnH 78H 00H All sound off (abrupt stop of sound on channel n) MIDI
CTRL 121 BnH 79H 00H Reset all controllers MIDI
CTRL 123 BnH 7BH 00H All notes off MIDI
CTRL 126 BnH 7EH 00H Mono on MIDI
CTRL 127 BnH 7FH 00H Poly on (default power-up) MIDI
CTRL CC1 BnH ccH vvH Assignable Controller 1. cc = Controller number (0-5Fh), vv = Control GS
value (0-7Fh). Control number (ccH) can be set on CC1 CONTROLLER
NUMBER (Sys. Ex 40 1x 1F). The resulting effect is determined by CC1
controller function (Sys.Ex. 40 2x 40-4A)
CTRL CC2 BnH ccH vvH Assignable Controller 2. cc = Controller number (00h-5Fh), vv = control
value (0-7Fh). Control number can be set on CC2 CONTROLLER NUMBER
(Sys.Ex. 40 1x 20). The resulting effect is determined by CC2 controller
function (Sys.Ex.40 2x 50-5A).
RPN 0000H BnH 65H 00H 64H 00H 06H vv Pitch bend sensitivity in semitones (default = 2) MIDI/GM
RPN 0001H BnH 65H 00H 64H 01H 06H vv Fine tuning in cents (vv = 00 -100, vv = 40H 0, MIDI
vv = 7FH +100
RPN 0002H BnH 65H 00H 64H 02H 06H vv Coarse tuning in half-tones (vv = 00 -64, vv = 40H 0, MIDI
vv = 7FH +64
NRPN 0108H BnH 63H 01H 62H 08H 06H vv Vibrate rate modify (vv = 40H -> no modif) GS
NRPN 0109H BnH 63H 01H 62H 09H 06H vv Vibrate depth modify (vv = 40H -> no modif) GS
NRPN 010AH BnN 63H 01H 62H 0AH 06H vv Vibrate delay modify (vv = 40H -> no modif) GS
52