User manual

1.11 Nrpn 03755h: Effects on/off

Midi message:

control 99 = 55 (37h), control 98 = 85 (55h), control 6 = vv

Midi message code (in hexadecimal):

B0h 63h 37h, B0h 62h 55h, B0h 06h vv

Each bit of vv byte is used for selecting an effect ON or OFF as following:

76543210

0 0 REV CHR 0 3D EQ2 EQ1

REV bit = 1: Reverb ON

CHR bit = 1: Chorus ON

3D bit = 1: Spatializer ON

EQ2, EQ1 bits: Equalizer

EQ2 = 0, EQ1 = 0: equalizer off

EQ2 = 1, EQ1 = 0: 2 band equalizer

EQ2 = 1, EQ1 = 1: 4 band equalizer

Default power-on values are:

Rev = 1, Chr = 1 (Reverb/Chorus ON)

3D = 1 (Spatializer ON)

EQ2 = 1, EQ1 = 1 (4 Band equalizer)

1.12 Nrpn 03756h: Input modules on/off

Midi message:

control 99 = 55 (37h), control 98 = 86 (56h), control 6 = vv

Midi message code (in hexadecimal):

B0h 63h 37h, B0h 62h 56h, B0h 06h vv

Each bit of vv byte is used for selecting a Input module ON or OFF as following:

76543210

0 0 REV 0 0 EQU ECH INPUT

INPUT bit = 1: Input1, Input2 ON

ECH bit = 1: Stereo delay on inputs ON (set only if using 128Kx16 RAM, always 0 if using 64Kx16 RAM)

EQ bit = 1: Input1 and 2 Equalizer ON

– bit = 1: not implemented

REV bit = 1: Input1 and 2 Reverb ON (set only if using 128Kx16 RAM, always 0 if using 64Kx16 RAM)

Default power on values are:

Rev = 0, Equ = 0, Ech = 0, Input = 1

1.13 Midi output on 4 outputs

A) Each midi channel can be output to master or auxiliary outputs using nrpn 3800h till 380Fh:

nrpn 38xxh = 0h: midi channel xxh is master output