User manual

MIDI devices – MIDI In
In this pop-up screen you can choose the available MIDI device to send preset data to, in our case the
NeoSynth. Midi in & out selections are saved so thet are retrieved next time you start the software.
MIDI devices – MIDI Out
In this pop-up screen you can choose the available MIDI device to receive preset data from, in our case the
NeoSynth.Midi in & out selections are saved so thet are retrieved next time you start the software.
MIDI devices - Connect to NeoSynth
Activating this line will make a connection with the NeoSynth to show you the firmware version, the hard-
ware version and the serial number (under the knob). As soon as you see that info appear you know that
the connection has been made with the Neosynth.
Misc. – Auto send
When selected, the software editor will send every parameter change made in the editor immediately.
When unselected you will have to use the “Send”button in the upper screen to send the whole preset to
Neosynth. Also you can right click on a knob or any other control to send it indiviually. (On OSX control-
click).
Misc. – MIDI thru
When the box is checked, all incoming midi data in the software will be forwarded to the MIDI out, so this
has to be used with care since it can result in a midi loop (a confirmation box appears in the software
mentioning this possible midi loop).
The midi thru can be used with a midi file player connected to the soft input. This way you can change the
sounds by turning knobs in the software while the midi song is playing.
Misc. – Link Left & Right parameters
With this one selected all parameters that have a left and right version are linked, meaning if you change
one of them, the other one will change too with the same value. When unselected you can make complete
individual settings for the left and right version of a parameter.
H
ELP
choosing this menu item you will get into a help file that basicly contains the same info as this manual
as far as it concerns the use of the patch editor software.
38