User manual

Equalizer – high gain control (up to 5.2 Khz)

This knob controls the level of the gain for the high frequency. 0 = -12 dB, 127 = +12 dB.

Equalizer – high frequency control

This knob controls the high frequency that can be level controlled by the high gain control.

PATIALIZER

This effect can enhance the“stereo feeling”of a sound or sounds. You can also use it with a 4 speaker set-

ting when you use both the main outputs and the aux outputs together.

Spatializer – level control

This slider controls the amount of signal going into the spatializer effect.

Spatializer – Delay control

This control sets the amount of delay signal that creates the spatial effect. Higher settings give a more

pronounced spatial effect.

Spatializer – stereo/mono checkboxes

These checkboxes determine if a stereo or mono signal goes into the spatializer effect.

Spatializer – main+aux/main checkbox

These checkboxes determine if the spatializer signal goes to the main outputs plus the aux outputs or

only to the main outputs.