User manual

Reverb – time control
This knob controls the time of the reverb tail. Low settings have a short reverb tail, high settings make a
long reverb tail.
Reverb – delay control
This knob controls the delay time for the reverb types 6 and 7.
C
HORUS
In simple terms the chorus effect thickens a sound by adding a slightly changed copy of the orginal to the
original. The change is in the pitch of the copy. Because it is very little difference, our ears do not perceive
the sound as out of tune. Parameters like delay and pitch modulation will add to this effect. Extreme set-
tings can create real different sounds though.
Chorus – main level control
This knob controls the amount of chorus signal going to the main outputs.
Chorus – aux level control
This knob controls the amount of chorus signal going to the aux outputs.
Chorus – chorus into reverb level control
This knob controls the amount of chorus signal going back into the reverb effect.
Chorus – type control
This knob sets the type of chorus. There are 8 different types.
0. Chorus 1
1. Chorus 2
2. Chorus 3
3. Chorus 4
4. Feedback
5. Flanger
6. Short delay
7. Feedback delay
Chorus – pre-low pass filter control
This knob controls the cutoff frequency of the signal that is going into the chorus effect.
Chorus – delay control
This knob controls the delay time
Chorus – feedback control
This knob sets the amount of chorus signal that is fed back into the chorus effect.
25