User manual

Enable Reverb

This checkbox enables/disables the Reverb effect.

Enable Chorus

This checkbox enables/disables the Delay effect.

Enable Eq

This checkbox enables/disables the Equalizer effect.

Enable Spatializer

This checkbox enables/disables the Spatializer effect.

REVERB

For a overall function of the reverb effect see the description at the Input FX section above.

The reverb controls here differs from the reverb controls in the external audio path effects section. It has

more extended controls.

Reverb – level control

This slider controls the amount of dry signal going into the reverb effect.

Reverb – main level control

This knob controls the amount of reverb signal going to the main outputs.

Reverb – aux level control

This knob controls the amount of reverb signal going to the aux outputs.

Reverb – type control

This knob sets the type of the reverb. There are 8 settings:

0. Room 1

1. Room 2

2. Room 3

3. Hall 1

4. Hall 2

5. Plate

6. Delay

7. Pan Delay

Reverb – pre-low pass filter control

This knob controls the cutoff frequency of the signal that is going into the reverb effect.