User manual

Delay – Feedback control

This slider determines how much of the Delay signal is fed back into the Delay FX. With higher settings it

takes a longer time for the delay signal to fade out.

Delay – Filter control

This slider determines how much filtering will take place on the delay signal. With higher settings you can

simulate old tape machines that loose high frequencies on the delay signal by their nature.

The filter is a 6 dB lowpass filter inserted in the feedback loop.

Delay – Delay into Reverb control

This slider determines how much of the Delay signal will be fed back into the Reverb FX. Set to 0 only the

dry signal will go through the Reverb FX. Higher settings will have a reverb on the delay signal as well.

Delay – Delay line 1 level controls (left and right)

This slider determines the level of the main delay line whose delay time has been set with the Delay Time

slider. So maximum delay times (1000 ms) will be made with this delay line.

Delay – Delay line 2 level controls (left and right)

This slider sets the level of a second delay line, whose time is derived from the Delay time setting. The

delay time for delay line 2 is 1/3 of the time made with the Delay time setting. For instance, if the delay

time of delay line 1 is about 750 ms, this delay line will produce a delay signal after 250 ms.

Delay – Delay line 3 level controls (left and right)

This slider sets the level of a second delay line, whose time is derived from the Delay time setting. The

delay time for delay line 2 is 1/3 of the time made with the Delay time setting. For instance, if the delay

time of delay line 1 is about 750 ms, this delay line will produce a delay signal after 500 ms.

QUALIZER

This effect is actually a number of filters that control specific parts of the soundspectrum. With an equal-

izer you can enhance or push back certain frequency ranges like the bass frequencies, middle frequencies

or high frequencies of a sound. It’s a perfect effect to make a sound stand out in a mix of various sounds.

Or to cut off some irritating frequencies in a sound.

It’s a 4 band equalizer with gain and frequency controls and a bandwith control for the two mid bands.

Note that you have a complete independent equalizer effect for both the left and right audio channel.

Equalizer – low gain control

This knob controls the level of the gain for the low frequency. 0 = -12 dB, 127 = +12 dB.

Equalizer – low frequency control (up to 1.25 Khz)

This knob controls the low frequency that can be level controlled by the low gain control.