User manual

to down.
LINE IN L+R level control
This knob controls how much signal that comes in from the line inputs will be fed into the stereo signal
path.
Enable inputs
This checkbox enables/disables the inputs.
The external audio path is split into left and right paths each with its own panning and level control.
This makes it possible to have two completely independend mono signals going through the external
audio effects section where they can have different settings.
Summed external audio left channel pan control
This knob controls the panning of the audio signal from the left external audio path. So you can feed
something or a lot into the right channel as well.
It is fed into the external audio path after the level control of the right channel.
Summed external audio left channel level control
This knob controls the level of the audio signal from the left external audio path going into the effects section.
Summed external audio right channel pan control
This knob controls the panning of the audio signal from the right external audio path. So you can feed
something or a lot into the left channel as well.
It is fed into the external audio path after the level control of the left channel.
Summed external audio right channel level control
This knob controls the level of the audio signal from the right external audio path going into the effects
section.
After these controls the external audio goes into the dedicated effects section. See further on for details
the Inputs FX section. When the audio comes out of the effects section there are even more controls!
External audio output level control
First there is a level control which controls the amount of signal going to the digital S/PDIF output (stereo)
and the auxiliary outputs (left and right).
External audio mixing level control
This is a level control which controls the amount of the external audio signal that comes out of the ef-
fects section which will be fed into the synth audio path.
Now we are going to take a look at the synth audio path.
17