User manual

General

Leds behaviour

The behaviour of the leds on the Neosynth says something about the status of the NeoSynth in various

conditions:

Status 1 led Status 2 led

Yellow Red

Normal mode

Neosynth is booting On On

Neosynth idle Off Off

Neosynth idle – USB attached Off On

Neosynth playing – USB attached/not attached Lighting On/Off

Sound bank or firmware upgrade mode

Previous sound bank erase Ping pong fast

Sound bank upgrading Ping pong slow

Firmware upgrading Ping pong fast

Firmware upgrade finished - Success On On

Sound bank upgrade finished - Success On On

Sound bank upgrade finished – Invalid SD card Off Off

Sound bank upgrade finished - Error On Off

Sound bank upgrade

This is done in 2 steps :

1. Erasing of previous sound bank : Leds will ping pong fast : requires about 7 minutes.

If using patch editor software, a progression bar is available for this first step;

2. Upgrade of new sound bank : Leds will ping pong slow : requires about 13 minutes.

If using patch editor software, a progression bar is available for this second step

See the next chapter about the patch editor software for details on this.

USB MIDI driver

The Wave Idea NeoSynth USB MIDI driver for Windows XP can be installed if you want to change the generic

Windows XP USB MIDI driver name. But it is not demanded. For a description of the installation progress visit

WaveIdea’s website (http://www.waveidea.com) to download and read the PDF manual for that.