User`s manual

8 ASSIGNING

8.1 Assigning Controllers

z You can use the ASSIGN function to re-define a control parts by data type and MIDI

channel.

z Operation：【SHIFT】ÖD#1

【Assign Controller】Ö【Locate a control part】Ö【Set

value】Ö【ENTER】Ö【Assign Channel】 Ö【Set value】Ö【ENTER】

z In the above assigning operation, to【Locate a control part, please move a control

part. For example, you can move a fader or rotate a knob, etc.

z Controller value range：0-171

z Channel value range：1-16

z Please refer to the appendix <Assignable controller list> for more information.

There are two values for the cc#144 RPN and cc#145 NRPN in <Assignable

controller list>, which are MSB value and LSB value, so the keyboard will

instruct you to set the two values.

In <Assignable controller list>, the types from cc#149 to cc#171 are switch

controllers, so they can only be assined to buttons.

To assign the keyboard aftertouch to other controller, please use the below key

function assigning.

【SHIFT】ÖA#4

【Assign A.Touch】Ö【Set value】Ö【ENTER】

8.2 Assigning Notes

z You can assign the function shortcut button F1-F6 to note on/off message and set

the MIDI channel.

z Operation：【SHIFT】ÖE1

【Assign Note】Ö【Locate a part】Ö【Set value】Ö【ENTER】

Ö【Assign Channel】 Ö【Set value】Ö【ENTER】

z In the above operation, please press a button from F1-F6 to【Locate a part】.

z The note velocity is fixed to 127.

z Note value range：0-127

z Channel value range：1-16

8.3 Assigning Program changes

z You can assign the function shortcut button F1-F6 to program change message and

set the MIDI channel.

z Operation：【SHIFT】ÖF1

【Assign Program】Ö【Locate a part】Ö【Set value】Ö

【ENTER】Ö【Assign Channel】 Ö【Set value】Ö【ENTER】

z In the above operation, please press a button from F1-F6 to【Locate a part】.

z Voice value range：1-128

z Channel value range：1-16

Refer to the appendix <Assignable controller list>, <Note list> and <GM voice

list>.