User`s manual

32
8.4 Mute Pads And Knobs
 You can mute pads and knobs by stop them from sending out MIDI data, and
this operation will not affect the keyboard, the joystick or the pedal.
 Operation: Ö G#3【Mute】Ö
 Default: Off
 Range: On, Off
8.5 Send Out Snapshot
 You can send out the keyboard snapshot (settings), and the receiver device will
quickly have the same settings.
 Operation:
Ö A3【Snapshot】
8.6 U-CTRL Mode
 You can control popular computer softwares in the U-CTRL mode. In this mode,
Pads and knobs will send out preset control data along with the SHIFT button,
while the keyboard,the pedal and the joystick work the same way like in the
REMOTE mode.
 Operation:
1. Press the right U-CTRL button on the front panel, and the buttron will light
on.
2. Launch your computer software, and follow the software’s manual to load
the MackieControl template.
3. Set the remote control port in the template as “USB AUDIO DEVICE [2]”
(Device name for U-Key).
 In the U-CRTL mode, pads and knobs together with the SHIFT button can be
used to control the software either in mode A(Indicator A is on) or in mode
B(Indicator B is on) or in mode A+B(Both indicator A and indicator B are on).
 In the U-CTRL mode, the keyboard, the pedal, the joystick and the Octave
buttons work the same way like in the REMOTE mode.