User`s manual

tone generator and the MIDI out port; when Local is set to Off, the keyboard will

only send MIDI data to the MIDI out port.

 Operation:

Ö G#2【Local On/Off】

 Default: On

 Range:

{on}, {off}

7.9 Data Dump

 You can dump the keyboard settings by sysx data to other MIDI device, so you

can save and restore the keyboard settings.

 Operation: ÖA2【Dump】Ö

MIDI data: F0 00 20 63………F7

7.10 Device Number

 When you have several devices with the same model type conneted in your

MIDI system, you can use the Device Number so only the device with the same

device number will receive the corresponded sysx. Besides, the device number

of the keyboard will also be included in all sysxes sent out.

 Operation:

Ö A#2【Device Number】Ö【Adjust parameter】Ö

 Default: 0

 Range: 0-16

7.11 Select Information To DISPLAY

 The LED can display many informations, and you can select the needed

information to to be shown on the display. When you click or move a part of the

keyboard like knobs or pads, the part-related informations will be displayed.

7.11.1 Program Number

 You can display the current program number (patch or voice number)

 Operation:

Ö B2【Program】Ö

 Range: 1-128