User`s manual

25
parameter】Ö Ö【Assign Channel】 Ö【Adjust parameter】Ö
 Here 【Select part】 means moving the part in the keyboard.. In this mode you
can use any parts except for Octave and SHIFT buttons to assign controllers.
 Controller Range: 0-168
 Channel Range: 1-16
6.5 Save And Recall User Bank
 You can save your personal panel settings to one of the 8 user Banks, and
recall your settings from them.
 To save the current settings, please press and hold the data dial, then press one
of the eight pads.
 To recall settins from the user Bank, please press and hold the SHIFT button,
then press one of the eight pads.
 When you recall settings from a user bank, the current settings will
be replaced.
 You can use your computer with the U-KEY Brain software for
unlimited numbers of user banks.
7 SYSTEM setup
7.1 Keyboard Channel
 Operation: Ö C#2【Keyboard Channel】Ö【Adjust parameter】Ö
 Default: 1
 Range: 1-16
The keyboard channel only affects the channel of the keyboard, joystick
and pedal. Pad channels and knob channels have their own settings; will
not change by the keyboard channel. To change those channels, follow
the assignment operation.
7.2 Dual
 When the Dual function is on, each note played on the keyabord will be sent out
on two MIDI channels to make duplicated ntoes.