User`s manual

24
6 REMOTE Mode
 Press the joystick until both indicator A and B are light for Remote mode.
6.1 Use The Pads To Control The Software
 In the Remote mode, you can assign pads to any MIDI note, any kind of MIDI
controller or more, see the appendix 10.1 of this manual, so you can use the
pads to control a lot of things in your software.
6.2 Use The Knobs To Control The Software
 In the Remote mode, you can assign knobs to any MIDI note, any kind of MIDI
controller or more, see the appendix 10.1 of this manual, so you can use knobs
to control a lot of things in your software.
6.3 Assign Notes & Channel
 Operation: Ö B1【Assign Note】Ö【Select part】Ö【Adjust parameter】
Ö
Ö【Assign Channel】 Ö【Adjust parameter】Ö
 Here 【Select part】 means moving the part in the keyboard. In this mode you
can select pads or pedals as the part to assign notes
 Note Range: 0-127
 Channel Range: 1-16
 Changing the keyboard channel will not affect the part channel assigned here.
6.4 Assign Controllers & Channel
 Operation: Ö C2【 Assign Controller 】 Ö 【 Select part】Ö 【 Adjust