User`s manual

3.5 Key Function

 A lot of the U-Key functions are set by the keys.

1. When the button indicator is on, the keyboard enters the key

function mode.

2. In the key function mode, those keys work as the function keys.

3. This is the number key reigon, use those keys to change values on the

LED.

4. The button is used to confirm the operation and send data.

3.6 Joystick

The Joystick can be moved to the four directions, Up, Down, Left and Right. By default,

the joystick will send the below data:

Direction Function MIDI data

Up Modulation CC#1

Down Brightness CC#74

Left Pitch Bend Down Pitch Bend Down

Right Pitch Bend Up Pitch Bend Up

3.7 Pedal Jack

 You can connect either a switch pedal (Sustain pedal) or a continuous pedal

Some operation will work right away with out confirmed by

！