User`s manual

16
3.3 Change Voice (Program Change)
 You can dial the【DATA / SAVE】knob to change the value on the LED.
 The 【DATA / SAVE】knob can also work as a button to confirm or save data
 By default, the 【DATA / SAVE】knob is used to change the voice number, and
the changed number will blink until the knob is pressed to send the program
change data.
3.4 Factory Setup (Reset)
 Usually, the keyboard will automatically memorize its last settings and recover to
that setting when turned on. However, you can use the reset function to turn all
the U-Key setting to the factory setup.
 To change to the factory setup, please press 【OCTAVE -】and【OCTAVE +】
buttons while turning on the keyboard, then the keyboard will initialize to the
factory setup. During this process, the LED will blink until the initializing is
completed.
The reset process will clear everything that you have done to the
keyboard, please be careful!