Operation Manual

Learn all the functions of a new remote control not yet included

in the database of the LEARN 5 in 1 remote control

With the LEARN 5 in 1 remote control, it is possible to create up to 5 completely empty keypads

so that a total of 85 new commands can be copied with the LEARN function.

After setting up one of these keypads with LEARN commands, it can be disabled by programming another

code on the appliance selection key and subsequently reactivated, just as it was before, by re-entering

the code 800x on the same appliance selection key or on another key.

1. Programme an appliance selection key with one of the

following codes: 8000, 8001, 8002, 8003 or 8004.

2. To copy and memorize the signals from one or more

original remote controls, follow procedure .

(x = 0, 1, 2, 3, 4)

+++

8 0 0 x

Although not indicated on the keypad,

some keys can be used for additional commands.

Find them on your remote control by pressing the keys one by one and discovering the commands that

interest you.

In particular, the additional functions most frequently used, such as NORMALIZATION, COLOUR and

BRIGHTNESS, can be found on the following keys:

HOW TO USE THE ADDITIONAL COMMANDS WHICH DO NOT APPEAR ON THE KEYPAD

For the functions used less frequently, look for the additional commands on the site www.cme.it. As well

as easily finding the code to programme your remote control, consulting the on-line guide will help you

to find which keys on the remote control correspond to the additional commands. You can memorise the

additional commands on the

F1 - F2 - F3 - F4

function keys in place of the corresponding original TV

functions.

Normalization:

Brightness (+): or

Brightness (-): or

Colour (+): or

Colour (-): or