User`s manual

17
6 Firmware upgrade
z You can upgrade the firmware of GPP-3 via an USB connection, by using the
upgrade program.
z To enter the upgrade mode, please depress both PEDAL1 and PEDAL3. Now
power on the product.
z You can find the upgrade program and the instructions on the CME web site.
（http://www.cme-pro.com）.
7 Specifications
z Pedal
 3 pedals including two switch pedals and one continuous pedal.
z Functions
 Basic functions: switch data and continuous data.
 MIDI data sent: Controller# change.
 Parameter change: MIDI send channel and MIDI controller type.
z Panel Controls and Indicators
 3 LED indicators
z Input/Output Terminals
 MIDI OUT, PEDAL out 1－3, USB port, DC IN port，POWER switch.
z Power Supply
 Power can be supplied via USB port (when connected to computer via USB)
 Power can also be supplied via AC Power Adaptor (When used separately.)
 AC Power Adaptor requirement: 9V 500mA
z Dimensions (W x D x H)
 GPP-3：373*278*97.5（mm）
z Weight : 4 kg
* Specifications and appearance are subject to change without notice.