User`s manual

assigning mode for a pedal, then the controller# will not be changed and you will

enter the MIDI channel assigning mode.

4.4 Assign MIDI Channel

z By assigning a MIDI channel, you can change the sent out MIDI messages of a

pedal for the MIDI OUT and the USB port.

z Follow the below steps to assign the MIDI channel:

I. After you finished the controller# assigning for a pedal and no pedal is

depressed for 3 seconds, you will enter the MIDI channel assigning mode

for the same pedal, that the LED is on.

II. Depress the pedal that you want to assign the MIDI channel for. Each time

you depress the pedal, the MIDI channel value will increase by one from

0-15, which means channel 1-16, and the corresponded LED will flash once.

III. If no pedal is depressed for 3 seconds, the product will save the new

settings and return to the normal power on mode.