Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
82
st
Scan Time / line
Note:
For further information see AT+FDIS
Read command:
Response:
AT+FDCC?
<dcc>
OK
Parameter:
vr
See Test command
br
See Test command
wd
See Test command
ln
See Test command
df
See Test command
ec
See Test command
bf
See Test command
st
See Test command
Write command
AT+FDCC=<vr>,<br>,<wd>,<ln>,<df>,<ec>,<bf>,<st>
Response:
+FDCC: (list of <vr>s), (list of <br>s), (list of <wd>s), (list of <ln>s), (list of
<df>s), (list of <ec>s), (list of <bf>s), (list of <st>s)
Parameter:
vr
See Test command
br
See Test command
wd
See Test command
ln
See Test command
df
See Test command
ec
bf
See Test command
See Test command
st
See Test command
AT+FDFFC
AT+FDFFC
Data Compresssion Format Conversion
Used for FAX class 2 only
This parameter determines whether there is a mismatch in the ME response between the data
format negotiated for the facsimile session (reported by the +FDCS:DF subparameter) and the Phase
C data desired by the controlling application, indicated by the optional +FDT:DF subparameter, or
the +FDIS=DF subparameter for the +FDR operation.
Test command Response:
AT+FDFFC=?
+FDFFC: (list of supported <df>s)
OK/ERROR/+CME ERROR
Parameter:
<df> 0
mismatch checking is always disabled. The controlling
application has to check the +FDCS: DF subparameter and
transfer matching data
Read command Response:
AT+FDFFC?
<df> OK
Parameter:
<df>
See Test Command
Write command Response:
AT+FDFFC=<df>
+FDFFC: (list of supported <df>s)
OK
Parameter: