Specifications

AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
61
AT+CGQMIN? +CGQMIN:
<cid
>,<precedence>,<delay>,<reliability>,<peak>,<mean>[
<CR><LF>+CGQMIN:
<cid
>,<precedence>,<delay>,<reliability>,<peak>,<mean>[…]]
OK/ERROR/+CME ERROR
Parameter:
<cid
>
numeric PDP Context Identifier
<PDP_type
>
See Test command
<precedence
>
See Test command
<delay
>
See Test command
<reliability
>
See Test command
<peak
>
See Test command
<mean
>
See Test command
Write command
AT+CGQMIN=[<cid>[,<precedence>[,<delay>[,<reliability>[,<peak>[,<mean>]]]]]]
Response:
OK/ERROR/+CME ERROR
Parameter:
<cid
>
See Read command
<PDP_type
>
See Test command
<precedence
>
See Test command
<delay
>
See Test command
<reliability
>
See Test command
<peak
>
See Test command
<mean
>
See Test command
AT+CGQREQ
AT+CGQREQ Quality of Service Profile (Requested)
Test command Response:
AT+CGQREQ=?
+CGQREQ: <PDP_type
>, (list of supported <precedence>s), (list of
supported <delay
>s), (list of supported <reliability>s) , (list of
supported <peak
>s), (list of supported <mean>s)[<CR><LF>
+CGQREQ: <PDP_type
>, <precedence>, <delay>, <reliability>,
<peak
>, <mean>[…]]
OK/ERROR/+CME ERROR
Parameter:
<PDP_type
>
string parameter of Packet Data Protocol type
PPP
Type PPP
IP
Type IP
<precedence
>
numeric parameter for the precedence class
0
network subscribed value
1..3
<delay
>
numeric parameter for the delay class
0
network subscribed value
1..4
<reliability
>
numeric parameter for the reliability class
0
network subscribed value
1..5
<peak
>
numeric parameter for the peak throughput class
0
network subscribed value
1..7