Specifications

AT command set for XX Siemens mobile phones and modems
__________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September.2004
55
0E0
network subscribed value
5E2-6E8
Range of supported values
<Delivery of erroneous SDUs
>
a numeric parameter that indicates whether
SDUs detected as erroneous shall be delivered
or not
0
No
1
Yes
2
no detect
3
network subscribed value
<Transfer delay>
a numeric parameter (0,1,2,…) that indicates
the targeted time between request to transfer
an SDU at one SAP to its delivery at the other
SAP, in milliseconds
0
network subscribed value
1..4000
milliseconds
<Traffic handling priority
>
a numeric parameter (1,2,3,…) that specifies
the relative importance for handling of all SDUs
belonging to the UMTS bearer compared to the
SDUs of other bearers
0
network subscribed value
1..3
Priority Level
Read command Response:
AT+CGEQMIN?
+CGEQMIN: <cid
>, <Traffic_class>, <Maximum bitrate UL>,
<Maximum bitrate DL
>, <Guaranteed bitrate UL>, <Guaranteed
bitrate DL, <Delivery order>, <Maximum SDU size>, <SDU error
ratio>, <Residual bit error ratio>, <Delivery of erroneous
SDUs>, <Transfer delay>, <Traffic handling
priority>[<CR><LF>
+CGEQMIN: <cid
>, <Traffic_class>, <Maximum bitrate UL>,
<Maximum bitrate DL
>, <Guaranteed bitrate UL>, <Guaranteed
bitrate DL, <Delivery order>, <Maximum SDU size>, <SDU error
ratio>, <Residual bit error ratio>, <Delivery of erroneous
SDUs>, <Transfer delay>, <Traffic handling priority>
OK/ERROR/+CME ERROR
Parameter:
<cid
>
numeric PDP Context Identifier
<Traffic_class
>
See Test command
<Maximum bitrate UL
>
See Test command
<Maximum bitrate DL
>
See Test command
<Guaranteed bitrate UL
>
See Test command
<Guaranteed bitrate DL
>
See Test command
<Delivery order
>
See Test command
<Maximum SDU size
>
See Test command
<SDU error ratio
>
See Test command
<Residual bit error ratio
>
See Test command
<Delivery of erroneous SDUs
>
See Test command
<Transfer delay
>
See Test command
<Traffic handling priority
>
See Test command
Write command