Specifications

AT command set for XX Siemens mobile phones and modems
_________________________________________________________________________________________
_________________________________________________________________________________________
Document No.: A30880-A10-A001-XX-
D376
Revision: Master R75
Revision Date: 29. September, 2004
44
AT+CPIN=?
OK
Read command Response:
AT+CPIN?
+CPIN: <code
>
OK/ERROR/+CME ERROR
Parameter:
<code
>
READY
No further input necessary
SIM PIN
SIM PIN input necessary
SIM PUK
SIM PUK input necessary
PH-SIM PIN
Device code PIN (theft protection) input
necessary
PH-SIM PUK
Device code PUK (theft protection) input
necessary
SIM PIN2
PIN2, e.g. for editing the FDN book;
only possible if previous command was
acknowledged with +CME ERROR:17
SIM PUK2
Only possible if previous command was
acknowledged with error +CME ERROR:18
device specific codes (SIM LOCK):
PH-FSIM PIN
There is no current PIN
PH-FSIM PUK
Phone locked to very first inserted SIM
PH-NET PIN
There is no current PIN
PH-NET PUK
Network Personalization is actually a PUK
PH-NETSUB
PIN
There is no current PIN
PH-NETSUB
PUK
Network Subset Personalization is actually a
PUK
PH-SP PIN
There is no current PIN
PH-SP PUK
Network Personalization is actually a PUK
PH-CORP PIN
There is no current PIN
PH-CORP PUK
Network Personalization is actually a PUK
The required error message can (must) be
provoked by an attempted Write command
Write command
AT+CPIN=<pin>[,<newpin>]
Response:
OK/ERROR/+CME ERROR
Parameter:
<pin
>
Password for appropriate lock; if the lock is a PUK, a <newpin
>
is necessary.
<newpin
>
New password for the lock
AT+CPUC
AT+CPUC Price per unit and currency table
Test command Response:
AT+CPUC=?
OK
Read command Response:
AT+CPUC?
+CPUC: <currency
>,<ppu>
OK/ERROR/+CME ERROR
Parameter:
<currency
>
three-character currency code (e.g. “EUR”)