Specifications

3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
9
8
Release 6
This command requests the MT to reset user data. The user data in the phone will be reset to default values. If setting
fails, a MT error, +CME ERROR: <err>, is returned. Refer subclause 9.2 for <err> values.
If the MT is locked and this command is used, then the MT will be unlocked after the master reset.
Test command returns OK
Defined values
<phone lock code > string type; Security code (Phone Lock code) must be verified before performing the
master reset.
Implementation
Optional.
8.37 List all available AT commands +CLAC
Table 97: +C action command syntax
Command
Possible response(s)
+CLAC
<AT Command1> [<CR> <LF> <AT
Command2>[…]]
+CME ERROR: <err>
+CLAC=?
+CME ERROR: <err>
Description
Execution command causes the MT to return one or more lines of AT Commands.
Note: This command only returns the AT commands that are available for the user.
Defined values
<AT Command >:
Defines the AT command including the prefix AT. Text shall not contain the sequence 0<CR> or OK<CR>
Implementation
Optional.
8.38 Delete alarm +CALD
Table 98: +CALD action command syntax
Command
Possible response(s)
+CALD=<n>
+CME ERROR: <err>
+CALD=?
+CALD: (list of supported <n>s)
+CME ERROR: <err>
Description
Action command deletes an alarm in the MT. If the command fails in an MT error, +CME ERROR: <err> is
returned. Refer subclause 9.2 for <err> values.
Test command returns supported array index values.
Defined values
<n>: integer type value indicating the index of the alarm; default is manufacturer specific