Specifications

3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
9
5
Release 6
+CSGT?
+CSGT: <text>, <mode>
+CME ERROR: <err>
+CSGT=?
+CSGT:(list of supported <mode>s),
<ltext>
+CME ERROR: <err>
Description
This command sets and activates the greeting text in the MT. The greeting text is shown in the MT display when the
MT is turned on. The command can also be used to deactivate a text. If setting fails in an MT error, +CME ERROR:
<err> is returned. Refer subclause 9.2 for <err> values.
The read command queries the current <text> and the status of the <mode> parameter
Test command returns supported <mode>s and the maximum number of characters in <text>. For example,
+CSGT: (0-1),20
Defined values
<text>: string type; A free text that shall be displayed. The text can not include <CR>
<mode>:
0 Turn off greeting text.
1 Turn on greeting text
Implementation
Optional.
8.33 Set Voice Mail Number +CSVM
Table 93: +CSVM parameter command syntax
Command
Possible response(s)
+CSVM=<mode>[,<number>[,<
type>]]
+CME ERROR: <err>
+CSVM?
+CSVM:<mode>,<number>,<type>
+CME ERROR: <err>
+CSVM=?
+CSVM: (list of supported
<mode>s), (list of supported
<type>s)
+CME ERROR: <err>
Description
The number to the voice mail server is set with this command. The parameters <number> and <type> can be left out if
the parameter <mode> is set to 0. If setting fails, an MT error, +CME ERROR: <err> is returned. Refer subclause 9.2
for <err> values.
Read command returns the currently selected voice mail number and the status (i.e. enabled/disabled).
Test command returns supported <mode>s and <type>s.
Defined values
<mode>:
0
Disable the voice mail number.