Specifications

3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
7
9
Release 6
0
no keypad event reporting
1 keypad event reporting using result code +CKEV: <key>,<press>. <key> indicates the key (refer IRA
values defined in table in subclause "Keypad control +CKPD") and <press> if the key is pressed or released (1
for pressing and 0 for releasing). Only those key pressings, which are not caused by +CKPD shall be indicated by
the TA to the TE.
NOTE 1: When this mode is enabled, corresponding result codes of all keys currently pressed should be flushed to
the TA regardless of <bfr> setting.
2 keypad event reporting using result code +CKEV: <key>,<press>. All key pressings shall be directed from
TA to TE.
NOTE 2: When this mode is enabled, corresponding result codes of all keys currently pressed should be flushed to
the TA regardless of <bfr> setting.
<disp>:
0
no display event reporting
1 display event reporting using result code +CDEV: <elem>,<text>. <elem> indicates the element order
number (as specified for +CDIS) and <text> is the new value of text element. Only those display events,
which are not caused by +CDIS shall be indicated by the TA to the TE. Character set used in <text> is as
specified by command Select TE Character Set +CSCS
2 display event reporting using result code +CDEV: <elem>,<text>. All display events shall be directed from
TA to TE. Character set used in <text> is as specified by command Select TE Character Set +CSCS
<ind>:
0
no indicator event reporting
1 indicator event reporting using result code +CIEV: <ind>,<value>. <ind> indicates the indicator order
number (as specified for +CIND) and <value> is the new value of indicator. Only those indicator events,
which are not caused by +CIND shall be indicated by the TA to the TE
2 indicator event reporting using result code +CIEV: <ind>,<value>. All indicator events shall be directed
from TA to TE
<bfr>:
0
TA buffer of unsolicited result codes defined within this command is cleared when <mode> 1...3 is entered
1 TA buffer of unsolicited result codes defined within this command is flushed to the TE when <mode> 1...3 is
entered (OK response shall be given before flushing the codes)
Implementation
Mandatory when any of the keypad, display, or indicator result codes is implemented.
8.11 Select phonebook memory storage +CPBS
Table 3: +CPBS parameter command syntax
Command
Possible response(s)
+CPBS=<storage>
[,<password>]
+CME ERROR: <err>
+CPBS?
+CPBS: <storage>[,<used>,<total>]
+CME ERROR: <err>
+CPBS=?
+CPBS: (list of supported <storage>s)
Description