Specifications

3GPP

3GPP TS 27.007 V6.3.0 (2003-

06)

Release 6

SIM PUK MT is waiting SIM PUK to be given

PH-SIM PIN MT is waiting phone-to-SIM card password to be given

PH-FSIM PIN MT is waiting phone-to-very first SIM card password to be given

PH-FSIM PUK MT is waiting phone-to-very first SIM card unblocking password to be given

SIM PIN2 MT is waiting SIM PIN2 to be given (this <code> is recommended to be returned only when the

last executed command resulted in PIN2 authentication failure (i.e. +CME ERROR: 17); if PIN2

is not entered right after the failure, it is recommended that MT does not block its operation)

SIM PUK2 MT is waiting SIM PUK2 to be given (this <code> is recommended to be returned only when the

last executed command resulted in PUK2 authentication failure (i.e. +CME ERROR: 18); if

PUK2 and new PIN2 are not entered right after the failure, it is recommended that MT does not

block its operation)

PH-NET PIN MT is waiting network personalization password to be given

PH-NET PUK MT is waiting network personalization unblocking password to be given

PH-NETSUB PIN MT is waiting network subset personalization password to be given

PH-NETSUB PUK MT is waiting network subset personalization unblocking password to be given

PH-SP PIN MT is waiting service provider personalization password to be given

PH-SP PUK MT is waiting service provider personalization unblocking password to be given

PH-CORP PIN MT is waiting corporate personalization password to be given

PH-CORP PUK MT is waiting corporate personalization unblocking password to be given

Implementation

Mandatory for MT not supporting the +CKPD command and supporting AT commands only.

8.4 Battery charge +CBC

Table 63: +CBC action command syntax

Command

Possible response(s)

+CBC

+CBC: <bcs>,<bcl>

+CME ERROR: <err>

+CBC=?

+CBC: (list of supported <bcs>s),(list of supported <bcl>s)

Description

Execution command returns battery connection status <bcs> and battery charge level <bcl> of the MT. Refer

subclause 9.2 for possible <err> values.

Test command returns values supported as compound values.

Defined values

<bcs>:

0 MT is powered by the battery

1 MT has a battery connected, but is not powered by it

2 MT does not have a battery connected

3 Recognized power fault, calls inhibited