Specifications

3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
7
2
Release 6
Defined values
<fun>:
0
minimum functionality
1 full functionality
2 disable phone transmit RF circuits only
3 disable phone receive RF circuits only
4 disable phone both transmit and receive RF circuits
5...127 reserved for manufacturers as intermediate states between full and minimum functionality
<rst>:
0
do not reset the MT before setting it to <fun> power level
NOTE: This shall be always default when <rst> is not given.
1 reset the MT before setting it to <fun> power level
Implementation
Optional.
8.3 Enter PIN +CPIN
Table 62: +CPIN parameter command syntax
Command
Possible response(s)
+CPIN=<pin>[,<newpin>]
+CME ERROR: <err>
+CPIN?
+CPIN: <code>
+CME ERROR: <err>
+CPIN=?
Description
Set command sends to the MT a password which is necessary before it can be operated (SIM PIN, SIM PUK, PH-SIM
PIN, etc.). If the PIN is to be entered twice, the TA shall automatically repeat the PIN. If no PIN request is pending, no
action is taken towards MT and an error message, +CME ERROR, is returned to TE. Refer subclause 9.2 for possible
<err> values.
If the PIN required is SIM PUK or SIM PUK2, the second pin is required. This second pin, <newpin>, is used to
replace the old pin in the SIM.
NOTE: Commands which interact with MT that are accepted when MT is pending SIM PIN, SIM PUK, or
PH-SIM are: +CGMI, +CGMM, +CGMR, +CGSN, D112; (emergency call), +CPAS, +CFUN, +CPIN,
+CDIS (read and test command only), and +CIND (read and test command only).
Read command returns an alphanumeric string indicating whether some password is required or not.
Defined values
<pin>, <newpin>: string type values
<code> values reserved by the present document:
READY MT is not pending for any password
SIM PIN MT is waiting SIM PIN to be given