Specifications

3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
6
6
Release 6
7.24 Fast call setup conditions +CFCS
Table 57: +CFCS action command syntax
Command
Possible response(s)
+CFCS=<priority>,<status>
+CME ERROR: <err>
+CFCS?
+CFCS: <priority>[,<priority>
[...]]
+CME ERROR: <err>
+CFCS=?
+CFCS: (list of supported
<priority>,<status>)
Description
The set command is used to edit the status of the priority level for fast call set-up stored on the SIM card or in the active
application in the UICC (GSM or USIM) EF
eMLPP
. If the user has no subscription to the priority level status he wants to
edit, an ERROR or +CME ERROR result code is returned.
The read command returns all enabled priority levels for fast call set-up stored on the SIM card or in the active
application in the UICC (GSM or USIM) EF
eMLPP.
If no priority level is enabled for fast call set-up, the result code OK
is returned.
Defined values
<priority>: integer type, eMLPP fast call set-up priority level {0,1,..,4} as defined in 3GPP TS 22.067 [45]
<status>: integer type
0 disable <priority> for fast call set-up
1 enable <priority> for fast call set-up
Implementation
Mandatory for a MT supporting AT commands only and eMLPP is implemented.
7.25 Automatic answer for eMLPP Service +CAAP
Table 58: +CAAP action command syntax
Command
Possible response(s)
+CAAP=<priority>,<status>
+CME ERROR: <err>
+CAAP?
+CAAP: <priority>[,<priority>
[...]]
+CME ERROR: <err>
+CAAP=?
+CAAP: (list of supported
<priority>,<status>)
Description
The set command is used to edit the status of the priority level for automatic answering for eMLPP stored on the SIM
card or in the active application in the UICC (GSM or USIM) EF
AAeM
. If the user has no subscription to the priority
level status he wants to edit, an ERROR or +CME ERROR result code is returned.
The read command returns all enabled priority levels for automatic answering for eMLPP stored on the SIM card or in
the active application in the UICC (GSM or USIM) EF
AAeM.
If no priority level is enabled for automatic answering for
eMLPP, the result code OK is returned.
Defined values
<priority>: eMLPP automatic answer priority level value {A,B,0,1,..,4} as defined in 3GPP TS 22.067 [45]