Specifications

3GPP
3GPP TS 27.007 V6.3.0 (2003-
06)
6
5
Release 6
7.22 eMLPP Priority Registration and Interrogation +CAEMLPP
Table 55: CAEMLPP parameter command syntax
Command
Possible Response(s)
+CAEMLPP=<priority>
+CME ERROR: <err>
+CAEMLPP?
+CAEMLPP:
<default_priority>,<max_priority>
+CME ERROR: <err>
+CAEMLPP=?
Description
The execute command is used to change the default priority level of the user in the network. The requested priority level
is checked against the eMLPP subscription of the user stored on the SIM card or in the active application in the UICC
(GSM or USIM) EF
eMLPP
. If the user doesn't have subscription for the requested priority level an ERROR or +CMEE
ERROR result code is returned.
The read command triggers an interrogation of the provision of the maximum priority level which the service subscriber
is allowed to use and default priority level activated by the user.
If the service is not provisioned, a result code including the SS-Status (?) parameter is returned.
Defined Values
<priority>: integer type parameter which identifies the default priority level to be activated in the network,
values specified in 3GPP TS 22.067 [54]
<default_priority>: integer type parameter which identifies the default priority level which is activated in
the network, values specified in 3GPP TS 22.067 [54]
<max_priority>: integer type parameter which identifies the maximum priority level for which the service
subscriber has a subscription in the network, values specified in 3GPP TS 22.067 [54]
Implementation
Mandatory for a MT supporting AT commands only and supplemantery service eMLPP is implemented.
7.23 eMLPP subscriptions +CPPS
Table 56: +CPPS action command syntax
Command
Possible response(s)
+CPPS
+CPPS: <priority>[,<priority>
[...]]
+CME ERROR: <err>
+CPPS=?
Description
This command returns all eMLPP priority subscriptions of the user stored on the SIM card or in the active application in
the UICC (GSM or USIM) EF
eMLPP
. If no explicit priority level subscription is stored on the SIM card or in the active
application in the UICC (GSM or USIM) EF
eMLPP
the result code OK is returned.
Defined values
<priority>: integer type, eMLPP subscription to priority level {0,1,..,4} as defined in 3GPP TS 22.067 [45].
Implementation
Mandatory for a MT supporting AT commands only and eMLPP is implemented.